Projects
Panels we have built, on the boats they were built for. Every one started as a photo and a list of circuits. Tap any photo to see it full size.
Before and after
Tired rocker panel, rebuilt
The old panel was faded and the labels were long gone. We measured the opening, kept the footprint, and built a new black panel with backlit labeled rockers and push to reset breakers.
Before
After
Wood and backlit
Chris Craft helm panel
Sixteen switches in one wood panel, etched and backlit to suit the boat's classic wheel and trim. The harness was built and labeled on the bench before it ever went aboard.
- Sixteen circuits in one panel
- Etched labels that glow at night
- Harness built and labeled on the bench
Full helm rebuild
Dual display helm with a switch rail
A new dash panel drawn around two large displays, cut on our CNC, test fit, then finished with a full row of switches under the glass and a matching overhead box.
- Drawn and cut in house
- Test fit before final finish
- Overhead electronics box to match
Electronics layout
Glass helm with a full gauge row
Two Garmin displays set flush in one panel above a full row of gauges and switches. It started as a pencil sketch with the measurements written on it.
- From sketch to finished helm
- Displays mounted flush
- Gauges and switches in one clean row
Bench to boat
Switch panel with wireless charging
A rocker panel with a built in phone charger and a red emergency switch, made to sit right under the Garmin.
- Phone charger built into the panel
- Backlit labeled rockers
- Sized to the existing opening
Center console
Black glass helm
Displays, switches and breakers brought together in one black panel, so the helm reads clean in daylight and at night.
- One panel instead of a patchwork
- Backlit switches
- Built to the boat's existing console
Fabrication
Dual display pod
A formed pod for a pair of displays, built and finished in the shop, then mounted at the helm.
- Formed and finished in house
- Displays sit flush and square
- Cable routing planned up front
Console and radios
Helm console and radio panel
Drawn on screen first, then cut with clean openings for the radios and displays.
- Designed before anything was cut
- Clean openings for every radio
- Ready to drop in
Center console
Console refit under the T top
A cleaner console layout with the electronics and switches where the captain actually reaches for them.
- Layout built around the captain
- New switch panel and electronics
Wood trimmed helm
Sportfish helm
A wood helm panel holding the display and controls, finished to match the rest of the bridge.
- Wood panel matched to the boat
- Display and controls in one face
On the bench
Finished panels and boxes
Stock panels, switch boxes and one offs, built and tested on the bench before they ship.
- Every panel bench tested
- Labels etched to order
Beyond panels
Backlit signs and laser work
The same etching and backlighting we use on panels, applied to signs, displays and gear.
- Etched and lit to order
- Wood, acrylic and metal
Your boat could be next.
Send a few photos and a switch list to get a drawing started.